Anmol Chemicals is a company in Mubychem Group established in 1976. They are the pioneer manufacturers of Maleic Acid, Pharmaceutical Fragrance & Flavor chemicals in India.  They have several manufacturing facilities spread across India. The group has toll manufacturers and representatives in China, UAE, Europe & USA.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

-- --

Maleic Acid USP Maleic Acid BP Maleic Acid Manufacturers

CAS No.: 110-16-7,  Molecular Weight: 116.1, Chemical Formula: C4H4O4

Maleic Acid BP IP USP
For MSDS Sheet Click MSDS of Maleic Acid Manufacturers

Maleic Acid
Pure IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

We make Maleic Acid in all grades suitable for food and pharmaceutical use.

Maleic Acid BP

C4H4O4  116.1  110-16-7

DEFINITION
Maleic acid contains not less than 99.0 per cent and not more than the equivalent of  101.0 per cent of (Z)-butenedioic acid, calculated with reference to the anhydrous  substance.

CHARACTERS
A white, crystalline powder, freely soluble in water and in alcohol.

IDENTIFICATION
A. Dilute 5 ml of solution S (see Tests) to 10 ml with water. The pH of the dilution is less than 2.
B. Examine the chromatograms obtained in the test for fumaric acid. The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (a).
C. Dissolve 0.1 g in 10 ml of water (solution a). To 0.3 ml of solution (a) add a solution of 10 mg of resorcinol in 3 ml of sulphuric acid. Heat on a water-bath for 15 min; no colour develops. To 3 ml of solution (a) add 1 ml of bromine water. Heat on a water-bath to remove the bromine (15 min), heat to boiling and cool. To 0.2 ml of this solution add a solution of 10 mg of resorcinol in 3 ml of sulphuric acid. Heat on a water-bath for 15 min. A violet-pink colour develops.

TESTS
Solution S
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and not more intensely coloured than reference solution.
Fumaric acid
To pass the test
Iron
To 10 ml of solution S add 2 ml of dilute hydrochloric acid and 0.05 ml of bromine  water. After 5 min, remove the excess of bromine by passing a current of air and add 3 ml of potassium thiocyanate solution. Shake. Prepare a standard at the  same time and in the same manner, using a mixture of 5 ml of iron standard solution  (1 ppm Fe) R, 1 ml of dilute hydrochloric acid, 6 ml of water and 0.05 ml of  bromine water. Allow both solutions to stand for 5 min. Any red colour in the test  solution is not more intense than that in the standard (5 ppm).
Heavy metals
1.0 g complies with limit test D for heavy metals (10 ppm).
Water
Not more than 2.0 per cent, determined on 1.00 g by the semi-micro determination of  water.
Sulphated ash
Not more than 0.1 per cent, determined on 1.0 g.

---

Maleic Acid USP

Maleic Acid
C4H4O4 116.07
(Z)-Butenedioic acid
Cis-Butenedioic acid [110-16-7].
Maleic Acid contains not less than 99.0 percent and not more than 101.0 percent of C4H4O4, calculated on the anhydrous basis.

Identification—
A: Dissolve about 500 mg of Maleic Acid in 10 mL of water: the pH of the solution is less than 2.
B: To pass chromatography test
C: Dissolve about 35 mg of resorcinol in 10 mL of sulfuric acid (Resorcinol solution). Dissolve about 100 mg of Maleic Acid in 10 mL of water (Test solution). To 0.3 mL of the Test solution add 3 mL of the Resorcinol solution, and heat in a water bath for 15 minutes: no color develops. To 3 mL of the Test solution add 1 mL of bromine TS, heat in a water bath for 15 minutes to remove the bromine, then heat to boiling, and cool. To 0.2 mL of this solution, add 3 mL of the Resorcinol solution, and heat in a water bath for 15 minutes: a violet-pink color develops.
Color and clarity of solution—
Dilute hydrochloric acid solution— Mix 27.5 mL of hydrochloric acid with sufficient water to make 1000 mL.
Reference solution— Mix 2.4 mL of ferric chloride CS and 0.6 mL of cobaltous chloride CS with Dilute hydrochloric acid solution to make 10 mL. Dilute 5 mL of this solution with Dilute hydrochloric acid solution to make 100 mL.
Test solution— Dissolve about 5 g of Maleic Acid in 50 mL of water.
Procedure— Place the Reference solution and the Test solution in matched color-comparison tubes, and compare the solutions by viewing them downward against a white surface : the Test solution is clear and not more intensely colored than the Reference solution.
Water: not more than 2.0% is found.
Residue on ignition: not more than 0.1%, determined on a 1.0-g portion.
Heavy metals— not more than 10 µg per g.
Limit of fumaric acid— To pass the test
Limit of iron—: not more than 5 µg per g.

Maleic Acid BP
Maleic Acid USP
Maleic Acid Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

 e-mail: anmolc@mtnl.net.in

Cell Call +91-9821870100
USA & Canadian Customers may Call 773-829-5811

-- --

Copyright and Usual Disclaimer is Applicable.
Last updated 03 March, 2012

Maleic acid manufacturers

Aluminium chloride -- Aluminum chloride -- Ammonium persulfate -- Calcium phosphate -- Calcium propionate -- Copper sulfate sulphate -- Calcium saccharate -- Ceric ammonium nitrate -- Cinnamaldehyde Cinnamic aldehyde -- Cupric chloride -- Potassium iodide -- Potassium nitrate Potassium nitrite -- Sodium sulfate -- Mono di ammonium phosphate -- Potassium acetate -- Potassium phosphate monobasic dibasic tribasic -- Sodium hexametaphosphate -- Sodium nitrite Sodium nitrate -- Sodium phosphate monobasic dibasic tribasic -- Zinc nitrate –

Alpha Beta Gamma methyl ionone -- Benzyl acetate -- Benzyl benzoate -- Benzyl salicylate -- BHA Butylated hydroxyanisole & BHT Butylated hydroxytoluene -- Ethyl naphthyl ether or Nerolin bromelia -- Ethyl chloroacetate -- HEDP Hhydroxyethylidenediphosphonic acid -- Isatoic anhydride -- Maleic acid -- Manzanate; Ethyl 2 Methyl Pentanoate or Valerate -- Methyl salicylate -- Phenyl ethyl propionate Phenyl ethyl acetate -- Sodium formaldehyde bisulfite -- Sodium propionate -- TBHQ Tert or Tertiary butylhydroquinone -- Zinc acetate -- Dimethyl anthranilate -- Geranyl nitrile -- Sodium salicylate -- Styrallyl acetate

Exports to USA, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Brazil, Chile, Argentina, Dubai etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.